Calculate Flats
Total Square Feet of Wall Surface
Deduct Square Feet for Openings (Doors, etc.)
Total Square Feet with waste factor
Dry Stack (12.5 sq. ft coverage per box with tight fitted joints)		Boxes
PrecisionFit™ (5 sq. ft coverage per box with tight fitted joints)		Boxes
All other profiles (10 sq. ft coverage per box with 1/2 inch min. joints)		Boxes
Calculate Corners
Total linear feet of outside (90°) corners
Total linear feet with waste factor
All corner profiles (6 linear feet per box)		Boxes
Calculate Wire / Weep Screed / Corner Bead
Pieces of Lath Needed (16 sq. ft. of coverage with overlap)
Total Linear Feet of Weep Screed		# of 10 ft pieces
Total Linear Feet of Casing Bead		# of 10 ft pieces
Calculate Preblended
Reference the NCMA Installation Instructions for type of stone veneer mortar needed for your application that meets ASTM C1714 / C1714M.
Follow manufacturers recommendation for coverage.
1/2 inch Scratch Coating		80lb bags of mortar aprox.
1/2 inch Setting Bed (back-buttering)		80lb bags of mortar aprox.
1/2 inch Grout Joint		80lb bags of mortar aprox.
Calculate Site Mixed
Reference the NCMA Installation Instructions for type of mortar needed for your application that meet ASTM C270.
1/2 inch Scratch Coating		lbs/Sand    lbs/Mort
1/2 inch Setting Bed (back-buttering)		lbs/Sand    lbs/Mort
1/2 inch Grout Joint		lbs/Sand    lbs/Mort